ATA Setup Menu

User Login    

 
Network Status
DHCP: Enabled Current IP: 192.168.1.130
Host Name: SipATA Domain: login
Current Netmask: 255.255.255.0 Current Gateway: 192.168.1.1
1st DNS: 192.168.1.1
2nd DNS: 168.95.192.1
 
Product Information
Product Name: ATA-1100 Serial Number: A10436BCAA80
Firmware Version: 2.8.51 MAC Address: 000945150BD3
 
System Status
Current Time: 1/1/2003 13:08:10 Elapsed Time: 00:07:02
Hook State: On Registration: Registered
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder:   Call 2 Encoder:  
Call 1 Decoder:   Call 2 Decoder:  
RTP Packets Sent: 156 RTP Bytes Sent: 4660
RTP Packets Recv: 127 RTP Bytes Recv: 2540
SIP Messages Sent: 59 SIP Bytes Sent: 37451
SIP Messages Recv: 30 SIP Bytes Recv: 20304
 
Password Setup
Admin Passwd: User Password:
 
Network Setup
DHCP: Static IP:
NetMask: Gateway:
HostName: Domain:
1st DNS: 2nd DNS:
1st NTP Server: 2nd NTP Server:
 
Configuration Resync
Resync Rule:
Resync Periodic:
 
RTP Parameters
SIP Port: EXT SIP Port:
RTP Port Min: RTP Port Max:
RTP Packet Size:
 
NAT Support
NAT Mapping Enable: NAT Keep Alive Enable:
Substitute VIA Addr: STUN Enable:
STUN Test Enable: STUN Server:
EXT IP: EXT RTP Port Min:
 
Proxy Server Setup
Proxy: Use Outbound Proxy:
Outbound Proxy: Register:
Make Call Without Reg: Register Expires:
Ans Call Without Reg:
 
User Account Setup
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Dial Plan
Dial Plan:
 
Audio Setup
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Echo Canc Enable:
Echo Supp Enable: DTMF Tx Method:
Phone Output Gain:
 
Port Polarity Setup
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
   
User Login