The mini PBX works with embedded Mini-itx ATOM motherboard and designed for Small & Medium Businesses. System developers can run most of the production version PBX software including asterisk in this kit. It can also simplify the installation procedure and thus, no more complicated migration work needed.
It comes with Intel Atom N2800 processors up to Dual Core 1.86 GHz. The system memory can be equipped with 240-pin DDR3 1066/1333/1600 SDRAM socket (up to 4 GB). There are flexible combinations of data storage such as mSATA connector that can meet the demands of any operating systems and applications. In addition, it consists of 1 PCI Slot that allow users to combine TDM410P,TDM800P,TE110P,TE405P PCI cards, in this mini pbx,the card is TDM410P.

Technical Specifications:

CPU: Intel Atom N2800 Dual Core 1.86GHz
DRAM: Slot onboard, 2GB DDR3 SDRAM.Upgradeable to 4 G.
Storage:1 mSATA slot ,32G mSATA SSD.Upgradeable to 64G/128G/256G.
Power: 110-240V input
Two front panel LEDs
Push button: For mode setting switch, Accessing a programmable GPI, Active low means switch is pressed
Expansion: 1 PCI slot, fixed and individual interrupt
Connectivity:2 PCI-E 10/100/1000Mbps Ethernet controller ( rlt8111c)
Desktop Mini system

Key Features:

80 Concurrent calls
Up to 1000 registers
Full Feature IP PBX
Video Calls
Recording
DID(Direct Inward Dialing Number)
Support SKYPE for SIP
Call Monitoring

Basic Features:

Codec: G.711-Ulaw,G.711-Alaw,G.726,G.729,GSM,SPEEX,H.261,H.263,H.263+,H.264
Call Hold/Forward/Transfer/Waiting/Parking
Call Paging and Intercom
Caller ID
Music On Hold
DISA(Direct Inward System Access)
Flexible Dial Plan
Ring Group
Conference Room
Call Logs
BLF(Busy Lamp Field)
Configuration By web
Built-in SIP/IAX2 server
Build-in voice mail server
System Backup and Restore
Echo Cancelation/VAD
Support Static/DHCP/PPPOE
DDNS Client(Support Dyndns.org)
Support NTP(Network Time Protocol)

Size and Weight:

Size: 24cm * 19.5cm * 5.6cm (D*W*H)
Weight: 2.2kg


Asterisk Telephone Card Options:

TDM410P: PCI FXO/FXS card up to 4 ports
TDM800P: PCI FXO/FXS card up to 8 ports
TE110P: PCI PRI card with single port
In this item,the telephone card is TDM410P.

Target Softwares:

Issabel,FreePBX,Asterisk,Elastix 2.0
Default Software : Issabel

- Issabel / FreePBX / AsteriskNow Settings (2FXO+2FXS):

[ChinaRoby.localdomain ~]# dahdi_genconf
[ChinaRoby.localdomain ~]# dahdi_cfg -vvvv
DAHDI Tools Version - 2.2.0
DAHDI Version: 2.2.0
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
[ChinaRoby.localdomain ~]# asterisk -vvr
ChinaRoby*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default en default In Service
1 from -pstn en default In Service
2 from-pstn en default In Service
3 from-internal en default In Service
4 from-internal en default In Service

Model :

..

Bookmark

....

..

Top

....

..

Print