-Support the access of wireless(GSM and CDMA), PSTN, Phone.
-Supports GSM, CDMA two kinds of wireless communication standard.
-Support GSM: 850M/900M/1800M/1900M, CDMA: 800M.
-Support 4 channels, user can choose to insert wireless, FXO or FXS module in each channel.
- The PCI slot is based on PCI2.2.
- Support the reversal function of polarity when call out by wireless.
- 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
- It supports all the functions of Asterisk PBX systems needed.

Special Feathers:
-GSM400's driver totally compatible with TDM400P's driver- Zaptel or Dahdi, so user don’t need to understand much knowledge about wireless part. All the program run on TDM400P can be used on GSM400, it reduce users' difficulty of development.
-GSM400 support 4 channels, user can choose to insert wireless, FXO or FXS module to each channel.GSM 400P realize the integrate of Wireless(GSM or CDMA) and PSTN.

Modules
Motherboard:GSM400
GSM modules: 1~4 pcs

Applications
-GSM(CDMA)- VoIP gateway
-Mobile IP-PBX
-GSM(CDMA) Call back
-GSM(CDMA) wireless bypass system
-GSM(CDMA) wireless call centre.

Hardware and software requirements
-Interface:PCI 2.2
-CPU:800+MHZ
-RAM:128+MB
-Linux kernel 2.4.x or 2.6.x

Size and Weight
-Size(L*W*H):210*105*24MM
-Wight: 305g

The environmental instructions for using
-Voltage: 5V/12V
-Power Dissipation Mas: 7.83w/39.82w

Product list

..

Bookmark

....

..

Top

....

..

Print